A LIVING HISTORY BLOG.

18TH CENTURY LIVING HISTORY IN AUSTRALIA.
Showing posts with label hunting sword. Show all posts
Showing posts with label hunting sword. Show all posts

Monday, 2 February 2015

My Leather Sword Scabbards.

Ben just emailed me asking about sword scabbards, so I thought to make my reply easier, I would post what images I have of my own creations. Ben asked if he could make one like a large knife sheath, well that is basically what I did for both of mine.
The leather for my basket hilt sword is quite heavy, and there were three layers to get through. So I found it easier to clamp the pieces together and use a drill in stead of an awl.

I did not have enough length of leather to make this scabbard in one piece, so I had to add a piece on the end.

At the hilt end of the scabbard I added an extra strengthening piece which you can also see in the image below.


After the main body of the scabbard was finished, I covered the whole in clothing weight leather.


The hanging straps are from some old horse tackle that I had laying around. I am not claiming that this is a copy of any original, it is simply the best I could come up with in my limited skills at scabbard making.


This is my hunting sword and scabbard, which was a little easier to make, because it is short and all one piece construction. I did use an awl on this one.






This is the leather scabbard frog I made up based on a Ranger frog used for a bayonet. I wanted an angle on the sword so it would not just hang down straight.

Original 18th century sword and frog.


The backs of two frogs.


More sword frogs.

Monday, 5 May 2014

Making A Simple Leather Sword Scabbard Frog. Short Video.




No special tools used during this construction. I made my own awl, and I cut the leather with my clasp knife. I used a fire log to place the leather on to make the holes. It took me about an hour to make.

Tuesday, 8 April 2014

My Hunting Sword Scabbard Finished.

My leatherwork is very basic, I have seen some lovely work over the years, but I can not even come close to matching it. Still what I make does work, so I do not give myself a too harder time ! At least you know that if I can make something, you can too.



I made this brass carrier slide from part of a sword basket guard.


Sunday, 6 April 2014

My New 18th Century Hunting Sword.

Well my new hunting sword is finally finished, and my close friend, Sword maker, Knife Maker and Bowyer Mark Jones who made it for me brought it to our group meeting yesterday. This sword is hand made, a lot of hours and file work went into making this sword, and to say that I am very pleased with the finished result would be an understatement. It is absolutely brilliant, top notch. Mark I don't have words to thank you enough my friend.
Keith.








The Mark Jones stamp on the guard.

Monday, 3 March 2014

The Making Of My Hunting Sword.

A very close friend, Bowyer & knife maker Mark Jones is making me a hunting sword. Still a lot of work to do, but this is it so far.


Monday, 6 September 2010

The Sword, Finally Finished (I think).

Do you remember the broadsword I purchased?

First I removed the cloth, but I found that the guard still caught on my hand.

So I removed part of the guard. This was better but I found that I was unable to grip the hilt properly and control the blade. Part of the reason is artheritis in my hands and wrist, but the grip was still not right.

I took the old grip off and made a new one which was a little larger. In doing so I found that the genuine leather wrap on the grip was in fact imitation!

I also found that there should be a leather guard between the brass basket hilt guard and the blade. so I made and fitted one and oiled and beeswaxed the new grip.

Oh yes, and I shortened the blade! It is now the common length of a cutless and a few other lighter swords.

Now what can I do with the section of blade I cut off? Hmmm.