A LIVING HISTORY BLOG.

18TH CENTURY LIVING HISTORY IN AUSTRALIA.
Showing posts with label flint & steel. Show all posts
Showing posts with label flint & steel. Show all posts

Thursday, 1 September 2016

Saturday, 27 August 2016

Flint & Steel Fire Lighting Methods.


Flint & Steel Fire Lighting Methods.
Flint & steel & the use of a tinderbox has been in use since before the middle ages. One common method was to strike sparks onto tinder in the tinderbox by striking flint against steel. Once the tinder has caught the spark from the steel & produced an ember, several methods of making fire can be employed.
1.    You can hold kindling material (dry grass or similar) to the smouldering tinder & blow the kindling into flame.
2.   You can use a spunk (sulphur headed match/splint) to make fire by simply holding the sulphur tip to the smouldering tinder & blow gently.
3.   If you are using tow rag as tinder & have charred this material directly in the fire, then there will be patches of cloth that have not completely charred. If you blow on the ember on the tow rag, the uncharred parts can be blown into flame.
4.   You can hold a candle close to the smouldering ember & drip wax onto the tinder. If the tinder is punk wood or tow rag, it can then often be blown into flame.

The Tinderlighter.
Using a tinderlighter you can employ methods 2 & 3 to create fire. You can also tip the smouldering tinder into a nest of dry kindling & blow the kindling into flame. This method works best if you add additional tinder.

The Flintlock Gun.
Using the pan on the flintlock gun in the same manner as using a tinderlighter, you can make fire by adding the smouldering tinder to a kindling nest. This method is improved by adding additional tinder to the already smouldering tinder in the kindling nest. You can also use a spunk/sulphur match.

No Tinderbox Methods.
Personally I think carrying a tinderbox is a good idea, especially for processing tinder charred directly in the fire. Without a tinderbox you need to find some other method of extinguishing the smouldering tinder. This can be done by using some type of lidded container, or you can bury the tinder under dry earth. The earth does make the tinder less effective, so the method I used was to wrap the smouldering tinder in a piece of leather before burying. Using a tinderbox is the preferred method.
1.    You can place your tinder in a nest of dry kindling & strike sparks onto the tinder & blow the nest into flame.
2.   You can hold a piece of tinder material on top of a piece of flint between thumb & forefinger & strike the steel downward against the flint. This will cast sparks upward onto the tinder held on top of the flint. Once the tinder is smouldering, you can add the tinder to a kindling nest. Again, this method works best if you add additional tinder to the nest.
Detail of the altarpiece of the Saint Georges church in Haguenau, Bas-Rhin, France.

In this lower image Joseph is holding flint & tinder in his left hand, & is about to strike downward against the flint with the steel held in his right hand. Below you can see an open wooden tinderbox & some spunks/sulphur headed matches/splints/tapers.

13.   You can use plant tinders even if they are not charred, by adding “a very little” pinch of gunpowder to the piece of tinder & striking a spark onto the gunpowder. Be very careful using this method. Only use very little gunpowder, & keep your face clear of the area. The powder will ignite & start the uncharred tinder smouldering.
For further instruction please visit my video channel & check out my fire lighting videos covering all these methods above. 


Monday, 16 May 2016

When Making Fire-Safety.

By Robert Griffing.


When making fire be sure that you have placed your powder horn with your gun well away from the fireplace. I suggest that you secure your fire steel to your belt bag buckle. In this way you can simply drop the steel after striking so that you can place all your attention immediately on the making of fire. In this way you are never likely to lose your steel.

Always make sure there is a clear area of at least two paces around your fireplace before making fire. Pay special attention to any debris that may take fire between the fireplace & your shelter.

Keep your fire small, large fires are a danger & they are more likely to attract attention than a small fire.

Make sure your store dry kindling in the back of your shelter in case the fire should go out at night when it is very cold.

If you do not need a fire, do not light one. It may attract unwanted attention. Always carry foods that do not require cooking.

Unless it is very cold & you need a fire for warmth, extinguish your cooking fire when you have finished cooking.

If you need to keep the fire going all night, make sure you have a good supply of firewood close to hand, so you can feed the fire at night without having to leave your bed.

Smoke from a fire made close to a tree will generally be drawn to the tree & find its way upward exiting through the forest canopy. However, this can not always be relied on because of the shifting breezes in forest areas, so keep your fire smokeless when you are able. Small dry wood will create heat quickly & produce less smoke. A hot fire will create less smoke even when larger pieces of wood are used.

Make sure that you always have plenty of dry spare tinder in your pack. If you are carrying gunpowder bags, place spare tinder in these bags as they become empty. Be sure to keep your tinderbox full of tinder.

Keith.

Tuesday, 29 March 2016

My Original 18th Century Fire Steel Update.


Some of you may remember that I acquired an original 18th century fire steel some time ago. I decided to add it to my equipment replacing the copy that I had been using. I found however that the original did not spark as well as the copy, so I re-hardened the steel in the fire. The results were no better, but I decided to keep it & use it anyway. If that was the way it was, then that is how I will use it.
I have seen in some videos copies of fire steels that shed an enormous amount of sparks as if they are coated with some radioactive material. There was such a product sold many years ago for coating the steel on a flintlock, but I think it was removed from sale!!!
Keith.

Saturday, 31 October 2015

Candlewood.




I have recieved enquiries regarding the use of "fat wood" as a tinder in 18th century fire lighting. The original term for this wood from the pine tree was "candlewood", & it can not be used as a tinder for use with flint & steel. It can however be used as kindling.
Another enquirie referred to no documentation found on the use of "candlewood" for fire lighting. Firstly this could be because the wrong name, fat wood, was used in the search, & secondly it seems that candlewood was more popular used as a candle for light rather than using it for kindling in a fire. However, that does not mean that someone did not use candlewood as a kindling in fire lighting in the 18th century. Certainly its use for lighting (candle) was known in the 17th century.


     "They are such candles as the Indians commonly use, having no other, and they are nothing else but the wood of the pine tree, cloven in two little slices, something thin, which are so full of the moysture of turpentine and pitch that they burne as cleere as a torch."
Rev. Mr. Higginson. 1633.
 "Out of these Pines is gotten the Candlewood that is much spoke of, which may serve as a shift among poore folks, but I cannot commend it for singular good, because it droppeth a pitchy kind of substance where it stands."
Wood, _New England's Prospect. 1642.


Tuesday, 20 October 2015

The Polypore Fungus Tinder for Flint & Steel Fire Lighting & Fire Bow.

This is really just an update to previous posts I have made concerning these Bracket Fungus. These first 3 images of Laetiporus Portentosus, also known as White Punk, were taken this past Monday afternoon in the forest in the Armidale/Guyra area of New England NSW. Mostly found on Stringybark trees here, but they will grow on other trees. This one was found within reach of my hand being about 7 feet off the ground.
I have not seen this type of bracket fungus growing in the tropics, but that does not mean that it does not exist there.
 Once charred directly in the fire it makes excellent tinder for flint & steel fire lighting, it can also be used in the Fire-Bow process & for carrying fire.
Similar fungus known as Piptoporus & Ryvardenia serve the same purpose & all look very much alike. The image is more important than the name, just remember what it looks like.



The following images are of this Bracket Fungus that I have found in the past. These fungus very often grow high in trees & to collect them you will need to throw a stick or rock to bring them down, but after rain, this fungus soaks up the water & becomes too heavy to hang on the tree & falls to the ground. Many are found on the ground.
This fungus is eaten by a fungus beetle, & the resulting dust will catch a spark without having to char the fungus in the fire.









A close up of the damage done by the fungus beetle, & a close up of the beetle itself (a lot of fun trying to get a good photo of this tiny beetle !!!)







Laetiporus Portentosus Map.





Friday, 24 July 2015

Equipment Update. A New Old Fire Steel.

One would think that with a bloke of my age & all the years I have been a woodsman, that there would not be any improvements to make to my gear. Then along comes something a little better than I have been using, & you realise that there are still improvements to be made.
Well I guess when you think about it, that is exactly as it was in the 18th century.
Another woodsman friend sent me an original fire steel, so I have swapped this original for the reproduction one I have been using for many years, & now carry the reproduction steel as a spare in the bottom of my knapsack. This original steel is about twice the size of my reproduction steel.
Keith.




Saturday, 4 April 2015

A Change Of Opinion. Flint & Steel Striking Methods.

I am not sure when or where, but I know that I once made the statement that striking the flint with the steel was not the correct way. Now if one was using a tinderbox or the nest method, this statement would be correct, because by striking the flint with the steel you would be directing the sparks up, instead of directing them down onto the tinder. However, some people do not use either the tinderbox or the nest method. Instead they hold the tinder on the top edge of the flint, & strike the steel upon the flint to catch sparks on the tinder.
In my opinion now, this is not a modern method, but in fact an early method perhaps before the use of the tinderbox, or perhaps this method was simply easier to use when lighting a candle.
In this illustration from Gutenberg for instance a tinderbox is being used, but the sketch appears to be showing the flint being struck by the steel as no sparks are shown as being created at this stage. Using this incorrect method would send the sparks upward before they fall on the tinder. If in fact they did reach the tinder in this round about way, the sparks would have lost their heat & may not catch on the tinder at all.


Here though in this detail of the altarpiece of the Saint Georges church in Haguenau, Bas-Rhin, France, you can see the flint is about to be struck with the steel to catch sparks on the tinder held by the hand on top of the flint.

English: Detail of the altarpiece of the Saint Georges church in Haguenau, Bas-Rhin, France.
Français : Détail du retable de l'église Saint-Georges de Haguenau, Bas-Rhin, France.




Fire Steels. Researching Three Types.

Fire Steels. Researching Three Types.
I am sure after doing so much research on fire steels, that there is still a lot to learn on my part. I have not even scratched the service on iron & steel properties & whether or not all steels were a combination of the two metals.
There are such a variety of steels from different countries, both in design, & in size. It also occurred to me whilst looking at the close resemblance of one steel to another, if perhaps some of them may have had their rat tailed handles repositioned after forging by the owner. Then there is the problem of not knowing if the artefact actually belonged to the site where it was found, or whether or not a Viking may have stolen a steel from an English village & taken it home with him on his return.
So I have tried to focus on three types or designs of steels only, principally because these are the particular ones I am interested in.

Birka Grave Fire steels Viking.


Post Medieval found in England. This same fire steel has also been described as being Roman.
5 cm long fire steel.
This one is almost a dead ringer for the one above, but this one was found on the Dawson Road convict site in Tasmania, Australia.

The following two steels were found in England.

At 9 cm long, these two steels are quite large in comparison to some copies made today. Going by the design & the amount of wear, my best guess at their period of construction is 17th century to mid 18th century, & both made in England.


From The Collector's Illustrated Encyclopedia Of The American Revolution By George C. Neumann & Frank J Kravic.
Top right you can see two steels which are very close in design to the steels found in England. All the steels in this image were found at American Revolution sites, but this does not mean that they are dated to this period, they could just as easily date to the French & Indian War or earlier.


This style of steel was surprisingly the most difficult to research. There is no doubt more information out there, but to date I have been unable to find it. This steel was shown with a late 18th century tinderbox with candle holder, but again, this does not necessarily date this steel to the same period.
http://www.collectivator.com/c/wendy-hamilton-antiques/sheet-brass-tinder-box-england-late-18th-century;


Again, a very similar steel, & even with the same amount of wear, but unfortunately there is no date on the steel.


Record ID: LON-6357F6
Object type: STRIKE A LIGHT
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation.
A Post Medieval iron tinder strike (17th century). This object has the characteristic rectangular body and curving square-sectioned arms with coiled terminals. There is a triangular notch in the upper surface just slightly off-centre. Dimensions: length: 78.86mm; width: 40.69mm; thickness: 5.78mm; weight: 29.91g. Identification and dating by Tony Pilson and Ian Smith based on foreshore context.

 Production Date:1500-1700 Museum Of London.
This example I think comes close to matching the squarer & sharper shoulders of the original I am researching.


Amsterdam 1650-1700.

Despite the similarity of all "C" type steels to one another, it is quite obvious that the original example that I have been trying to date is quite unique in it's design, with squarer sharper shoulders than any other of this type I have found so far.


The third design has been the easiest to research, & has been far more common than I first expected. In all these types & designs we must of course bare in mind that these steels have been made far & wide by different Blacksmiths with their own ideas of how a steel should look, or what particular style was perhaps easiest to use.
This is a closer look at the steel I have been trying to date. Note that the rat tail arm reaches down only just over half way, & that the wear is quite excessive considering the amount of steel that is shaved off each time when struck a glancing blow with a piece of sharp edged flint or other similar rock. Note the double cut marks of the file it was made from.

This steel is purported to be dated to 1620ad.

This steel showing very similar wear is dated to the 18th century. Again, note the double cut of the file this was made from.




This one is very similar, but much smaller.
Record ID: LON-891A42
Object type: STRIKING EQUIPMENT
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation  Find awaiting validation
Fire steel, striker light, dating to the post medieval period. The lighter is U shaped, and has flat surfaces on both sides. On side of the u shape is thicker, the thinner side curves into itself at the terminous

This one when seen in comparison to the size of the tinderbox it was displayed with is obviously large, at least I would say 9cm.
Tinder box with striker and flint. Photo taken at Ludlow Museum, Castle Street, Ludlow, Shropshire, England. (Photo credit: Wikipedia). Again the file cuts can be seen.

This steel reported to be from the medieval era is again very similar in shape. These are found open as this one is, & also closed with the rat tail handle closed against the main body of the steel.


In this detail from a painting The Fire by Giuseppe Arcimboldo 1566, two different fire steels can be seen in the ear & the nose. The nose is very similar to the one above, & the original I have been researching.

Recognition:
My sincere thanks to my close friends Russ Tyenna in Tasmania & Alan Poole in England for their major contribution to this article. Without their assistance it is doubtful I would have written this article.
Keith H. Burgess 4/4/2015.